Product Range
The Barlo Compact range comprises of single, double and double panel
plus convector radiators supplied with factory fitted grilles and side
panels in a choice of five heights with lengths from 400mm to 2000mm. Outputs
All radiators have been manufactured and tested in accordance with
BSEN 442. Finish
Every Barlo Compact radiator undergoes an intensive pre-treatment
process to protect against rust. The radiators are then finished with
Epoxy
Polyester Powder paint similar to RAL 9010 which may be over painted if
required. Packaging
Every radiator is protected top and bottom over the whole length and
height with heavy cardboard box ends and packed in shrink wrapped
polythene. Quality
All radiators are manufactured under a BS EN ISO 9001:2000 quality
system accepted by BSI. Warranty
All radiators are supplied under warranty for a period of five years in
respect of defective materials or manufacture. Connections
Each Compact radiator is manufactured with four 1/2" BSP TBOE
connections. Testing
All radiators are individually pressure tested to 13 bar and are suited
for a
working pressure up to 10 bar. Brackets
All radiators in the range are supplied with two or more brackets
depending on the length. Bracket Lugs
Two pairs of lugs are fitted on radiators up to and including 1600mm
long.
A third pair of lugs is fitted centrally on radiators 1800mm long and
over.
Tapping-To-Tapping Dimensions
All tapping-to-tapping dimensions may be obtained by subtracting 5mm
(1/4") from the nominal radiator length (accurate to ± 2mm). Materials
Barlo Compact radiators are manufactured from high quality cold-rolled
steel with a nominal thickness of 1.2mm. Installation
For indirect systems or closed circuits only at a working pressure not
exceeding 10 bar. WaterTreatment
It is strongly recommended on completion of the installation, the system
should be properly flushed and filled in accordance with the British
Standard Code of Practice for the Treatment of Water in Domestic Hot
Water Central Heating Systems BS 7593. Use of a corrosion inhibitor is
strongly recommended. Failure to observe this recommendation will
invalidate the manufacturer’s warranty. Conditions of Sale
The Barlo standard conditions of sale apply to all transactions. A copy
is
available on request. Conversion Information
The outputs quoted in this publication are based on a Delta T of 50°C.
Quinn are manufacturers of high quality round top
central heating radiators.
